Star Micro Systems Discussion Forums

Dear Michael,

After moving the A1 files to the Windows 2008 Server,

Using a Windows Admin Account,

I installed A1setup (A1 Workstation 6.00 Install Local Files).

Then I registered with the "All controls" box checked.

Near the end of the registration I got the following 2 error messages:

1. Windows Error Box -

pdd.exe - Entry Point Not Found

The procedure entry point SdbGetAppCompatDataSize could not be located in the dynamic link library apphelp.dll.

2. A1 Error Pink Box

General Error

Error 1705

Message: File access is denied

Message1: DO d:\lawlocal\law.exe WITH "1", "(my 3-letter account initials)"

Program FRMNEWVERSION.GNOST1

Line No 56


****

Is this a major error? Is it going to cause problems with users accessing our database? What can I do to correct it?

Thank you very much!

You don't need to check the All Controls at all so everything should be okay. If there is a problem, try registering the controls again - At the sign on screen you can just click Setup, Register Controls or in A1-Law you may click Tools, Miscellaneous, Register Controls.

Mike

Dear Mike,

Re-registered Using Setup - Register Controls today:

Got two more common error messages:

Failed to Register D:\LAWLOCAL\controls\TX4OLE.OCX

Failed to Register D:\LAWLOCAL\controls\TOC.OCX

Sincerely, Michael - Lerner, Moore, Silva, Cunningham & Rubel

Click the Notepad button on the main toolbe. If the notepad shows up then you are fine (since the controls will have already been successfully registered. If not, then go into A1-Law and register controls from within A1-Law (click Tools, Miscellaneous, Register Controls).

Mike